Ultimate 2016 Ford Focus Oil Change Guide: Step-by-Step Refilling and Engine Health Tips

Ever wondered if you’re giving your 2016 Ford Focus the care it truly deserves? Picture this: you’re due for an oil change, but you’re not quite sure where to start. Don’t worry, we’ve all been there. That’s why we’re here to guide you through the process step by step.

Changing your car’s oil might sound daunting, but with the right information at your fingertips, it can be a breeze. In this article, we’ll walk you through the ins and outs of changing the oil in your 2016 Ford Focus. From tools you’ll need to expert tips, we’ve got you covered.

Step 1: Gather the Necessary Tools

When preparing to change the oil in your 2016 Ford Focus, ensure you have the following tools ready:

• Oil filter wrench to safely remove the old oil filter.
• Socket wrench set to loosen the drain plug.
• Oil drain pan to catch the old oil.
• Funnel for easy and clean oil refill.
• Rags or paper towels to clean any spills.
• New oil filter made specifically for your Ford Focus.
• Correct type and amount of motor oil as recommended in your car manual.

Remember, having all the necessary tools at the outset will make the oil-changing process smooth and efficient.

Step 2: Prepare Your Ford Focus

Now that you have all the necessary tools ready, it’s time to prepare your Ford Focus for the oil change. Before getting started, make sure your car engine is cool to avoid any burns. Follow these steps to ensure a smooth oil-changing process:

• Park your car on a level surface to keep the oil draining evenly.
• Engage the parking brake for added safety.
• Pop the hood of your Ford Focus and secure it in place.
• Locate the oil dipstick and the oil filler cap.
• Remove the oil filler cap to help with oil drainage.

Remember, taking these precautionary steps will make the task ahead more straightforward.

Step 3: Drain the Old Oil

When it comes to draining the old oil from your 2016 Ford Focus, it’s essential to follow the correct steps for a clean and effective process. Here are the key steps you need to take:

• Locate the Oil Drain Plug: This plug is typically at the bottom of the oil pan.
• Position the Oil Drain Pan: Ensure it’s directly below the drain plug to catch the old oil.
• Unscrew the Drain Plug: Use a wrench to loosen it and allow the oil to flow out.
• Wait for the Oil to Drain Completely: This might take a few minutes.

You’re ready to move on to the next stage of the oil change process.

Step 4: Replace the Oil Filter

When it comes to changing the oil in your 2016 Ford Focus, replacing the oil filter is as essential as draining the old oil. The oil filter plays a crucial role in keeping your engine clean and free from contaminants.

Here’s how you can replace the oil filter in a few simple steps:

• Locate the oil filter: You can typically find the oil filter near the oil pan or under a cover. Refer to your vehicle manual for the exact location.
• Prepare the area: Place an oil drip pan below the oil filter to catch any oil that may spill during the replacement process.
• Remove the old oil filter: Use an oil filter wrench to loosen and remove the old oil filter. Be prepared for some residual oil to drain out.
• Install the new oil filter: Apply a thin layer of fresh oil to the rubber gasket of the new oil filter before installing it. Tighten the new filter by hand – no need to use the wrench for this step.
• Check the oil level: After replacing the oil filter, double-check that the oil drain plug is securely tightened, then refill the engine with the appropriate amount of new oil.

By following these steps, you’ll ensure that your 2016 Ford Focus receives a complete oil change, keeping your engine running smoothly.

Step 5: Refill with Fresh Oil

it’s time to refill your 2016 Ford Focus with fresh oil. Here’s how you can do it properly:

• Choose the Right Oil: Refer to your Ford Focus owner’s manual to find the recommended oil viscosity and type.
• Prepare for Refilling: Position a funnel securely in the oil filler hole to avoid spills.
• Add the Oil: Slowly pour in the recommended amount of oil, typically around 4 to 5 quarts for a Ford Focus.
• Check the Oil Level: After adding the oil, wait a few moments for it to settle, then use the dipstick to ensure the oil level is within the recommended range.

Remember, using the correct amount and type of oil is crucial for maintaining your engine’s health. Follow these steps diligently to complete the oil change process successfully.

Conclusion

You’ve now reached the final step in changing the oil of your 2016 Ford Focus. By following the recommended oil viscosity and type, using a funnel, pouring in the right amount of oil, and checking the level with a dipstick, you’re ensuring your engine’s well-being. Remember, maintaining the correct oil quantity and type is key to keeping your engine in top shape. By sticking to these steps, you’re on your way to completing a successful oil change, leading to optimal engine performance.

Frequently Asked Questions

Q: Why is it important to choose the right oil viscosity and type for my 2016 Ford Focus?

A: Selecting the correct oil viscosity and type recommended in the owner’s manual ensures optimal engine performance and longevity.

Q: How much oil should I pour into my 2016 Ford Focus during an oil change?

A: Typically, you should pour 4 to 5 quarts of oil into the engine of your 2016 Ford Focus.

Q: Why should I use a funnel when refilling the engine with fresh oil?

A: Using a funnel helps prevent spills and ensures a clean and accurate pour of oil into the engine.

Q: Why is it important to check the oil level with a dipstick after refilling the engine?

A: Checking the oil level with a dipstick ensures that the engine has the correct amount of oil required for proper lubrication and performance.

Q: How does maintaining the correct oil quantity and type benefit my engine’s health?

A: Proper maintenance of the right oil quantity and type helps to safeguard the engine against wear and tear, ensuring it operates smoothly and efficiently.